ArmA Bug? Reloading of AH1Z - FFAR and Hellfire

[satexas69]

I've found a pretty serious error I can't seem to resolve that didn't exist in OPF -

In the AH1Z -

1. The hellfires won't reload at an ammo truck.

2. The FFAR's will reload but it's VERY buggy

a. You have to sit at the ammo truck just right AND it seems to work 99% better if your hovering OFF the ground, than on it.
b. When your ffar's load, often they will go UP (like to say "20") then immediately go back DOWN to "0" (zero) - which is empty.


This is what I have in my ammotruck, a snippit of my ammo script:

Code: [Select]

_crate addmagazinecargo ["2000Rnd_762x51_M134",60]
_crate addmagazinecargo ["4000Rnd_762x51_M134",60]
_crate addmagazinecargo ["1200Rnd_762x51_M240",60]
_crate addmagazinecargo ["1500Rnd_762x54_PKT",60]
_crate addmagazinecargo ["2000Rnd_762x54_PKT",60]
_crate addmagazinecargo ["500Rnd_TwinVickers",60]
_crate addmagazinecargo ["100Rnd_127x99_M2",60]
_crate addmagazinecargo ["50Rnd_127x107_DSHKM",60]
_crate addmagazinecargo ["29Rnd_30mm_AGS30",60]
_crate addmagazinecargo ["48Rnd_40mm_MK19",60]
_crate addmagazinecargo ["500Rnd_145x115_KPVT",60]
_crate addmagazinecargo ["2100Rnd_20mm_M168",60]
_crate addmagazinecargo ["750Rnd_M197_AH1",60]
_crate addmagazinecargo ["2000Rnd_23mm_AZP85",60]
_crate addmagazinecargo ["300Rnd_25mm_GAU12",60]
_crate addmagazinecargo ["230Rnd_30mmAP_2A42",60]
_crate addmagazinecargo ["230Rnd_30mmHE_2A42",60]
_crate addmagazinecargo ["250Rnd_30mmAP_2A42",60]
_crate addmagazinecargo ["250Rnd_30mmHE_2A42",60]
_crate addmagazinecargo ["20Rnd_120mmSABOT_M1A2",60]
_crate addmagazinecargo ["20Rnd_120mmHE_M1A2",60]
_crate addmagazinecargo ["23Rnd_125mmSABOT_T72",60]
;; errors - _crate addmagazinecargo ["23Rnd_125mmHE_T72",60]
_crate addmagazinecargo ["14Rnd_FFAR",60]
_crate addmagazinecargo ["38Rnd_FFAR",60]
_crate addmagazinecargo ["6Rnd_Grenade_Camel",60]
_crate addmagazinecargo ["96Rnd_57mm",60]
_crate addmagazinecargo ["40Rnd_80mm",60]
_crate addmagazinecargo ["5Rnd_GBU12_AV8B",60]
_crate addmagazinecargo ["4Rnd_Sidewinder_AV8B",60]
_crate addmagazinecargo ["4Rnd_R73",60]
_crate addmagazinecargo ["80Rnd_S8T",60]
_crate addmagazinecargo ["180Rnd_30mm_GSh301",60]
_crate addmagazinecargo ["4Rnd_Ch29",60]
_crate addmagazinecargo ["40Rnd_S8T",60]
_crate addmagazinecargo ["180Rnd_30mm_GSh301",60]
_crate addmagazinecargo ["5Rnd_AT5_BRDM2",60]
_crate addmagazinecargo ["8Rnd_AT5_BMP2",60]
_crate addmagazinecargo ["2Rnd_TOW",60]
_crate addmagazinecargo ["6Rnd_TOW_HMMWV",30]
_crate addmagazinecargo ["8Rnd_Hellfire",70]
_crate addmagazinecargo ["12Rnd_Vikhr_KA50",60]
_crate addmagazinecargo ["30Rnd_122mmHE_D30",60]
_crate addmagazinecargo ["30Rnd_105mmHE_M119",60]

[IGWedge]

This was the error i was having and i was discussing a workaround here... http://www.ofpec.com/forum/index.php?topic=28849.0

maybe you can adapt it