BM-21

[Skaven]

Evis your a machinegun making models, all very fast and very nice, you sure your not a Factory of models   ;D
And ofcourse I'll help you with the textures  ;D

[Eviscerator]

it looks like stt is going to texture it for the nam pack so theres no need to waste skavens time and he'll be able to do other things

[Skaven]

 ;D OK    ;D

[ZIKAN]

Its good to see some new East side vehicles being made to balance the game out. Will you be releasing a 'big' East Side Vehicle add on pack?

I guess you are busy with other projects and so on, but i was looking at a BRDM-2, its the same as we have already, except it has a turret with a 14.5mm MG and a 7.62mm coax MG. Could you make something like this also if you get a chance?

Nice work m8, your an asset to the community like all the other 'add on makers/teams' out there  :cheers:

[Wires]

@Eviscerator: Perhaps a BMP-3? Basically a BMP-1 and BMP-2 wepons combined and a few extras.
Now we just need someone to convert all of UCE's units to Res with handguns ect!  ;D

Wires

[Eviscerator]

the bmp-3 is different to the bmp-1 in shape so it would need a brand new model, i plan to make one soon just not right now and its guns are much better than a mix of bmp 1/2 its got 100mm/30mm/AT-10/3 x PKT

and im hoping to make the kord/nsv/kpv as well to go with the Dshk, once the dshk is textured ill be able to make a few different mounts on vehicles, like an aa uaz with quad 50's and also trying a few things out with the brdm once the tool to work on odols has been released, ill have to wait until this tool is released to finish the BM-21 as the ural from the demo is of much less quality than the one in the game atm, it just needs the rockets texturing though and then i can swap it to the ingame model, also the same with modifications to any other vehicles

[OCOM_LMLVLM]

Kool, but dont forget to make teh DSchK stronger(Much stronger) than BMG(M2), cause the 14mm bullet should be able to penetrate armor of almost any modern APC

[ZIKAN]

Evis anychance of some more screen shots to wet our appetite of work you have done so far?  ;D

[Davies1]

this addon is going to kick serious bum good luck with it.
You sure BIS wont give you a job after all this?

[Eviscerator]

the Dshk is 12.7mm the KPV is the 14.5mm although i think the bullet the dshk uses is bigger than the nato 12.7mm as it was based on a british .50 bullet (i think) and is longer so a bit more powerful, and no new pictures of these addons until i can get them textured as they wont look too much different until they are unless you mean other addons im making?


oh and im 15 so not much of a chance of being shipped off to prague

[ZIKAN]

 ;D What other add ons are you making Evis?  

[Sakato]

Guys, I WANT that machinegun!

[Eviscerator]

BMD-2
MT-LB
LAV-25
PT-76
OH-13/Bell 47
AH-1G
AH-1W
P-51D
OH-58A
AH-60L
MH-60L
MH-47E
MH-60G
UH-60Q
DSHK + BM-21
(these are the already modelled addons, im in the early photo finding phase on some more things)


im also importing about 5 models for people, im not working on all of these alone, most of them i have help with texturing as i cant texture myself

[OCOM_LMLVLM]

Yes your right  , the DSchK/NSV(utes)/Kord fires a 12.7x109mmR (the one that M2 fires is a 12.7x99mm) so, its a lil bigger n more powerfull (can penetrate over 14mm of armor at 500m)
And the KPV fires a 14.5x115mmR  bullet (KPV is a one of the most powerful MGs in the word, well actually the BRG15 (FN) is a most powerfull mg in the world (15.5x115mm  :wow:) but  due to financial difficulties of the FN, the company shelved
this project in the early 90s, so that left the KPV as one of the most powerfull mg's in the world  ;D)

[Davies1]

whats the progress on the bm-21?
Hows the wheel coding going?
and whats the score with that beaut machine gun ?