OFPEC Forum

Addons & Mods Depot => OFP - Addons & Mods General => Topic started by: Ding on 01 Jun 2005, 21:56:53

Title: [Solved]Shooting through objects?
Post by: Ding on 01 Jun 2005, 21:56:53

I have created a pretty nice looking trench in O2 (Picture below), Now I have made a geometry Lod, Paths and a roadway Lod which all work, but i can shoot clean through it, i have looked back on some old tutorials but havnt foundanything which tells me how to deal with this?, can anyone tell me how to Make the object solid for bullet fire? i have a feeling its somthing to do with the Hit points Lod or maybe the land contact Lod but im not Certain.

Thanks,
       Khublai. :)

Title: Re:Shooting through objects?
Post by: Planck on 01 Jun 2005, 22:35:57

I think you need a Fire Geometry LOD as well.

This is used to check if the model is hit by fire.
Without it bullets just pass through the model.

Edit: Mind you I always thought the Geometry LOD was used in the abscence of a Fire Geometry LOD.



Planck

Title: Re:Shooting through objects?
Post by: Ding on 01 Jun 2005, 23:15:34

i made a  fire geomotry LOD by duplicating my geomitry LOD, it dosnt seem to have made any difference.  :-[

Title: Re:Shooting through objects?
Post by: Planck on 01 Jun 2005, 23:27:57

I would check that your geometry LOD is correct and has its list of components.


Planck

Title: Re:Shooting through objects?
Post by: Pilot on 01 Jun 2005, 23:32:08

Make sure there are no "openings" in the fire geo lod, do this by selecting
structure - topology - find non closed

Also, make sure there are no concave parts to your fire geo, do this by selecting

structure - convexity - find non convexities

To fix the convexity issue, select

structure - convexity - component convex hull

-Student Pilot

Title: Re:Shooting through objects?
Post by: Ding on 02 Jun 2005, 05:49:27

Thanks alot to all of you, now I have my Trench working Perfectly   ;D :D

i got it to work by going to the Fire geomotry LOD and did

structure - convexity - find non convexities
structure - convexity - component convex hull
i had also not done the comonents right  ::)

heres a picture of the final product a full working trench:

Title: Re:Shooting through objects?
Post by: 456820 on 03 Jun 2005, 09:45:59

looks good but i though in O2 you can decide where the object is going to sit like on ground level or through the fround by placing the object under the line on the top left pannel so caoultn you then make a trench in the ground

also since yuve fixed the problem use the solve button

Title: Re:Shooting through objects?
Post by: Ding on 09 Jun 2005, 05:59:09

i wish flashpoint was that easy, but its not, If you put it underground it will put it below ground but will have the ground on the island you are playing on half way through it. D: