OFPEC Forum

Addons & Mods Depot => OFP - Addons & Mods General => Topic started by: bradical02 on 06 Oct 2002, 20:01:59

Title: help with bridges
Post by: bradical02 on 06 Oct 2002, 20:01:59

I am having trouble placing bridges.  In Wrpedit, I set all the bridges at a height of 13 and uncheck the fit to ground box.  I then pbo the world and in the game, the bridges are at all different heights.  Can anyone help?

Title: Re:help with bridges
Post by: Planck on 06 Oct 2002, 23:55:20

If you would send your wrp to me, I'll have a look and tell you what I find.


mcnicoll7@yahoo.com


Planvk

Title: Re:help with bridges
Post by: Jakerod on 07 Oct 2002, 03:19:10

try checking out this thread http://www.ofpec.com/yabbse/index.php?board=17;action=display;threadid=195

Title: Re:help with bridges
Post by: MadAussie on 07 Oct 2002, 06:18:18

Gday Mate...
I am pretty sure planck will be able to help you..he helped me..however..regarding the un-even ness of the bridge..you must make sure that the water level isnt too deep..objects can be placed on ground and under but there seems to be a bug in the wrp-ofp in that objects cannot be placed above ground..they will all automatically fit to ground..I too had this problem for the first couple of weeks..nothing can be done other than redoing the heights:)
Hope this helps..
MadAussie out..

Title: Re:help with bridges
Post by: MadAussie on 07 Oct 2002, 06:21:04

Gday again..
I forgot to mention..(its pretty obvious) that water is NOT a ground level..
MadAussie out....
again   ;)

Title: Re:help with bridges
Post by: bradical02 on 09 Oct 2002, 00:33:08

thanks guys. I think i'll give it to Planck.  ;D

Title: Re:help with bridges
Post by: Deadsoldier on 09 Oct 2002, 06:33:25

hey,

If the area where yuo want to place the bridge over is not the same hieght..then it might be the problem. When you say  you want it 13 meters off the ground..then it means that its 13 meters above the ground exactly where you placed the 1st part of the bridge...

If you want to place the 2nd part of the bridge next to it..then you have to calculate the hieght ..thats only of the place is not the same hiehgt as the area of the 1st part. get it?

cheers

Title: Re:help with bridges
Post by: Planck on 10 Oct 2002, 21:38:56

bradical

Can you send me your e-mail addy........I lost it.

I need it to send your .wrp file back to you.

Planck

Title: Re:help with bridges
Post by: bradical02 on 15 Oct 2002, 23:27:46

bradical02@yahoo.com

ill see if ur thing works too deadsoldier.

Title: Re:help with bridges
Post by: Planck on 16 Oct 2002, 01:59:27

ok bradical,

Your .wrp file has been sent.


Planck