OFPEC Forum

Addons & Mods Depot => OFP - Addons & Mods Beta Testing => Topic started by: friendlyfire on 23 Jan 2005, 21:53:56

Title: Help Help Help!!!
Post by: friendlyfire on 23 Jan 2005, 21:53:56

I would like too know how too change 3DS files into P3D too import them in operation flashpoint

Title: Re:Help Help Help!!!
Post by: Pilot on 24 Jan 2005, 02:39:09

You do this in Oxygen.

Import into Oxygen by clicking File>Import>3D Studio

Then simply double click on your 3DS file, once it is loaded, save it as a P3D file.

Title: Re:Help Help Help!!!
Post by: friendlyfire on 24 Jan 2005, 16:44:04

my 02 must be knackered, it keeps crashing when i import 3Ds Files

HEL HELP HELP!!! :'(

Title: Re:Help Help Help!!!
Post by: GI-YO on 24 Jan 2005, 16:49:29

Try reinstaling it or downlaoding a new one, computers can get a bit finacky sometimes.

GI-YO

Title: Re:Help Help Help!!!
Post by: Pilot on 24 Jan 2005, 20:49:18

Did you install O2 properly?

Check out this site for install instructions:
http://ofp.gamezone.cz/_hosted/brsseb/tutorials/start/start.htm (http://ofp.gamezone.cz/_hosted/brsseb/tutorials/start/start.htm)

Title: Re:Help Help Help!!!
Post by: Plane on 05 Mar 2005, 07:41:57

When I import 3ds, it show "No object in 3ds file"
What's the problem?

Title: Re:Help Help Help!!!
Post by: Kyle Sarnik on 05 Mar 2005, 18:36:38

Erm, hold on everybody.

friendlyfire, check the poly count in your 3ds, if it is too high, O2 can't import it all at once.

Plane, your 3ds file is probably not meeting the standards to be imported into O2, I know someone who can help you but he is not on ATM, so check back later.

Title: Re:Help Help Help!!!
Post by: Plane on 06 Mar 2005, 04:52:33

Ok, but I can't even Send p3d to 3ds.
After sending 3ds, the new file is still with p3d extention and p3d format

Title: Re:Help Help Help!!!
Post by: Kyle Sarnik on 06 Mar 2005, 05:34:44

Thats because you can't. p3d can NOT be imported into 3ds, due to the format.

Title: Re:Help Help Help!!!
Post by: Plane on 08 Mar 2005, 12:08:29

Then is there any tool can convert *.smd  or *.ms3d to p3d format?