OFPEC Forum
Editors Depot - Mission Editing and Scripting => OFP - Editing/Scripting General => Topic started by: Messiah on 18 Jul 2004, 21:09:56
-
ok... i've copied and pasted an old briefing (been a while since i wrote one) and wrote in my objectives (luckily they had the same number of objectives...
i started my ofp mission and look at the briefing, and find that all my objectives have muddled into one objective... although im sure i've defined them all as seperate ones, and when i open up the HTML file, it has the seperate section for each one...
<p><a name="plan"></a>
December 14, 1985.
<br><br>
July 1st, 1990
<br><br>
22 Regiment, Special Air Service<br>
Command - Captain James McMath<br>
Patrol IC - Sergeant Steven Lancaster
<br>
<br>
<a href="#orders">Breifing.</a>
<br>
<br>
<a href="#profile">Area Intel.</a>
</p>
<br>
<br>
<h2>Mission Objective</h2><hr>
<p><a name = "OBJ_1">Insert onto Nogojev.
</p>
<hr>
<p><a name = "OBJ_2">Locate the American MH-60K Blackhawk.
</p>
<hr>
<p><a name = "OBJ_3">Destroy salvageable equipment on the Blackhawk.
</p>
<hr>
<p><a name = "OBJ_4">Rescue US Marine, Tod Barker.
</p>
<hr>
<p><a name = "OBJ_5">Rescue US Marine, Owen Johnson
</p>
<hr>
<p><a name = "OBJ_6">Rescue US Marine, Leroy Jones
</p>
<hr>
<p><a name = "OBJ_7">Extract at </a><a href="marker:evacmarker">LS Echo.</a>
</p>
<hr>
thats the part that doesnt work... they all appear in the 1st objectives tick box... so there is only 1 tick box, instead of 7.... any ideas?
-
<p><a name="plan"></a>
December 14, 1985.
<br><br>
July 1st, 1990
<br><br>
22 Regiment, Special Air Service<br>
Command - Captain James McMath<br>
Patrol IC - Sergeant Steven Lancaster
<br>
<br>
<a href="#orders">Breifing.</a>
<br>
<br>
<a href="#profile">Area Intel.</a>
</p>
<br>
<br>
<h2>Mission Objective</h2><hr>
<p><a name = "OBJ_1">Insert onto Nogojev.</a>
</p>
<hr>
<p><a name = "OBJ_2">Locate the American MH-60K Blackhawk.</a>
</p>
<hr>
<p><a name = "OBJ_3">Destroy salvageable equipment on the Blackhawk.</a>
</p>
<hr>
<p><a name = "OBJ_4">Rescue US Marine, Tod Barker.</a>
</p>
<hr>
<p><a name = "OBJ_5">Rescue US Marine, Owen Johnson</a>
</p>
<hr>
<p><a name = "OBJ_6">Rescue US Marine, Leroy Jones</a>
</p>
<hr>
<p><a name = "OBJ_7">Extract at </a><a href="marker:evacmarker">LS Echo.</a>
</p>
<hr>
Try that, and I suggest downloading a briefing wizard. :)
:beat: *Gets Shot* :beat:
-
I think you forgot to close some <a> tags =)
-
thanks all - works a charm :)