OFPEC Forum

Addons & Mods Depot => OFP - Addons & Mods General => Topic started by: dth47 on 15 Jun 2004, 20:01:55

Title: Stretch Marks :D
Post by: dth47 on 15 Jun 2004, 20:01:55

A hedge.
OK this is what it looks like :D but i want it to stretch with the floor and the contours, like the US open tents do, i presume it needs some kind of LAND contact LOD? but i only knwo how to se them for cars :P Anybody know how to do this? Thanks BAM
(http://www.dth47.pwp.blueyonder.co.uk/ofpisland/hedge1.jpg)

Title: Re:Stretch Marks :D
Post by: oyman on 15 Jun 2004, 21:14:14

select the whole model then press shift+E

look under Surface, check "Keep Height (fence)" press apply, then ok
like in this picture
(http://gallery.cybertarp.com/albums/userpics/14873/uhh%7E0.jpg)

doesnt have anything to do with the landcontact lod

Title: Re:Stretch Marks :D
Post by: DBR_ONIX on 17 Jun 2004, 17:10:18

Also you should make the model continue down.. So there's no way you could see a gap at the bottom..
But oymans suggestion should work good (It will).. But still copy the hedge, and paste it to the bottom of the proper hedge (Visiable bit).. Join it with some faces etc
Just to make sure you don't see underneath it, if you understand what I mean

Gd luck :)
- Ben