OFPEC Forum

Editors Depot - Mission Editing and Scripting => OFP - Editing/Scripting General => Topic started by: Vulture on 02 Oct 2003, 18:01:04

Title: question
Post by: Vulture on 02 Oct 2003, 18:01:04

this may be a stupid question, but how do you make the AI follow a waypoint coninueously. E.G. a patrol or guard duty etc.

Title: Re:question
Post by: m21man on 02 Oct 2003, 18:07:17

This is probably in all the basic mission editing tutorials, but here goes: Make a circle/square/etc patrol pattern with "move" waypoints. At the last waypoint, make a loop waypoint near the first. The patrol will now repeat the patrol pattern infinitely.

Title: Re:question
Post by: Wolfrug on 02 Oct 2003, 18:08:55

The name of the waypoint in question is actually the cyclewaypoint  ;)

Otherwise it's all good. :toocool:

Wolfrug out.

Title: Re:question
Post by: The-Architect on 02 Oct 2003, 18:13:31

You can double click on the unit who started the patrol and choose cycle if you want the guy to loop from where he started or you can put a cycle on top of any other waypoint along the route to make the guy cycle from there.
Make sure you zoom right in so the cycle waypoint is touching or directly on top of the other one.
The-Architect

Title: Re:question
Post by: dmakatra on 02 Oct 2003, 19:39:18

And if you want to cancel a cycle WP read my Switch Trigger tute @ ed depot.

:beat: *Gets Shot* :beat: